Quays at Odense Port

Explore our quays, port areas, water depths and facilities. Odense Port provides the infrastructure for maritime operations and large-scale industrial projects.

OH_overblik1

Find your quay in Odense and Munkebo

Delivering sand, stone or gravel to a project in or around Odense? At "Norgekaj" materials can be unloaded and stored close to the city, potentially reducing the final road transport distance. Use the map to locate "Norgekaj" and the other quays in the inner Port
Explore the bulk materials terminal at Norgekaj
Use the Munkebo map to locate your quay and see its position relative to workshops, production facilities and storage areas. Quay 69 is used for iron and steel plate cargoes, Quays 70–72 for scrap metal, and Quay 78 is the heavy-load quay, primarily used for wind turbine components. Quays 78–85 are typically used for loading and unloading.
View the quay map

Kort over odense indehavn og Munkebo

Shorter distances between quay and storage

Tell us where your cargo needs to go and when it needs to move. Together, we identify a quay and storage area that suit your schedule and help reduce unnecessary transport. If several deliveries need to be consolidated before shipment, we can also agree where to bring them together.

Mennesker på Odense havn

Water depth and vessel draught

The deep-water approach channel to Munkebo has a water depth of up to 11 metres, and the basin at the heavy-load quay has a depth of 11 metres. Permissible vessel draught depends on conditions along the entire route to the berth.
Provide your vessel’s length, beam, expected arrival and departure draughts, and quay number if known. The port office will help you clarify access conditions and plan the timing of your port call.

Luftfoto2024_Sejlrende

Quay surfaces and load-bearing capacity

OH_ kaj fra vendsiden2
Plan for the load at each location

Quays 69–79 have hard-surfaced areas suitable for activities such as bulk cargo unloading. Quays 80–85 have stone and gravel surfaces. Before positioning a crane, transporting heavy cargo or setting down a component, you need to establish the load-bearing capacity at the point of loading.
In this overview, the capping beam is the structural beam along the water’s edge. The quay apron is the working area alongside the quay, and the backland is the area further inland.

Kran17 løfter stålplader, formindsket
Quay 69-iron and steel plate cargoes

The load-bearing capacity is 5 t/m² within the first 4-6 metres from the capping beam and 15 t/m² further inland. This restricts mobile crane positioning. We help you assess crane positioning and outreach so the lift can be planned around your cargo and the vessel’s position.

Quay 70–72-scrap metal

The load-bearing capacity is 7.5 t/m² on both the capping beam and the quay apron.

Quays 73-76

The capping beam has a load-bearing capacity of 8 t/m², and the quay apron has a capacity of 7.5 t/m². We help you assess crane positioning and outreach so the lift can be planned around your cargo and the vessel’s position.

Quays 77 and 79

The load-bearing capacity is 10 t/m² on both the capping beam and the quay apron.

Quay 78-heavy-load quay

The heavy-load platform has a static load-bearing capacity of 35 t/m².

Quays 80–85

The load-bearing capacity is 10 t/m² on the quay apron and 40 t/m² in the backland. Contact the port office to confirm permissible loading at the quay edge.

Blue Tern coordinating heavy lifting and shipyard work

Extending the crane boom on the wind turbine installation vessel Blue Tern required planning and coordination between several partners. FAYARD, Liebherr and Odense Port contributed to the operation.

The published case study reports that the work was completed in 13 days. It illustrates how shipyard work, transport and heavy lifting can be coordinated within a single project.

Read about the Blue Tern upgrade

 

Practical information before your stay

Mennesker/medarbejder på Odense Havn
What mooring arrangements are available?

Quays 78–85 have 100-tonne mooring bollards for use with the vessel’s own mooring lines. Quays 77–85 have panel fenders, while Quays 70–76 have tyre fenders. If you require a mooring crew or plan to use Mediterranean mooring, please agree the arrangements with the port office before arrival.

How do I order fresh water, electricity and waste collection?

Fresh water, waste containers and a tanker for slops collection can be ordered through the port’s booking page. If your vessel requires an electricity supply, contact the port office with your quay number and requirements so we can confirm the connection available at your berth.

Areal map
Are you looking to lease commercial premises or quayside yard space

Whether you need a repair workshop, a production building or an outdoor storage area, we help you assess the location in relation to your berth. Our property listings show the premises and outdoor areas currently available to rent.

Main gate
Can my team access the port outside normal working hours?

The port is open around the clock, all year round. The gatehouse serving the ISPS-secured area in Munkebo is staffed 24/7. Arrange access for employees, visitors and drivers before arrival so they know where to report and which identification to bring. Access to changing facilities, showers and the staff canteen can also be arranged.

Join the Wind Industry Hub

Up to 2,600 people work at the port each day, where more than 100 companies form an industrial and wind energy cluster. Most are suppliers to the major wind turbine manufacturers based on site. For your business, this means proximity to potential partners and access to skilled tradespeople, including welders and electricians, when you need additional support.

DJI_0945
Contact us

Let’s discuss your requirements

  • This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.